Showing posts with label Figure conversions. Show all posts
Showing posts with label Figure conversions. Show all posts

Monday 14 September 2015

20,000 camels - quenching the thirst of the EEF

By early 1916, the Egyptian Expeditionary Force was using nearly 20,000 camels in its transport lines. Camels were organised in companies of about 2,000 led by Egyptian drivers.
Well with horn bucket, Palestine
The water needs of troops on the front line was often supplied by camel convoys with each camel carting two small 12.5 gallon tanks known as fanatis.
Filling fanatis near Jaffa, 1918
I could not resist having a well and camel train (of sorts) to populate a corner of the battlefield. As warmers, I think we often politely ignore the presence of the transport required to get troops into the firing line and supply them when they are there.
Camels with 'well sets'
So, in recognition of all this necessary 'graft' going on behind the lines, here is a scratch build of a couple of hardy engineers pumping up the brackish water from a desert well 'somewhere in Palestine' into the fanatics - ready for carting off to the line.
A05802. Probably PALESTINE, C. 1917. WATER PUMPS USED BY 1ST FIELD SQUADRON ENGINEERS
The two Royal Engineers are Eureka British in Sinai gun crew (yes, I use them for everything!) and the camel are Irregular Miniatures Egyptian Camel Corps (FZ88) with their riders lopped off.

Assembling the well - I'm a slow bricklayer!

Engineer at the well building up a sweat on the water pump
The fanatis display their balsa construction - should have used card!
Its enough to make a chap thirsty. Thanks for looking.

Sunday 30 August 2015

Heliograph team, Egypt and Palestine c1915 - Eureka 15mm British in Sinai conversion

In the BEF signals were dealt with by the Royal Engineers:

In 1914 each infantry Division included a Signals Company with a total strength of 162 men. It was organised into a Company HQ and 4 Sections, of which No 1 Section was responsible for communications with Divisional HQ and Nos 2-4 with the Brigades of the Division.
Source: http://www.1914-1918.net/whatfieldcoy.htm

Among the equipment available to the signallers, was the heliograph which employed a mirror (often mounted on a tripod) that was used to 'flash' Morse Code.

You can see some original footage of a heliograph in action here:

The heliograph was valued for its mobility, being quick to set up. It was a cheap signalling system with an impressive communication range in the right terrain. A 5 inch reflector had a signalling distance of some 50 miles (80 km), whilst the 9 or 12 inch models had a range of up to 80 miles (130 km). Best of all, in the Middle East theatre, there was plenty of sun!

Signals posts play an important role in the command system of If the Lord Spares us (ITLSU) rules by increasing the distance over which Battalion COs can operate effectively from the Brigade Commander-in-Chief.

There are no signals figures among the Eureka 15mm range so some conversion was necessary to obtain some signal posts. I have always liked the iconic images of heliograph teams operating in Egypt and Palestine, so wanted to put together some for my British.
The figures that provided the best conversion opportunity were the British in Sinai Artillery Crew (300HBC84). Here's a few pictures of how I approached the conversion.
The tripod is made of brass wire with a thin section of PVC tube for the mirror frame (white) and a circle of foil for the mirror itself (added after painting). Each 'leg' of the tripod was about 12mm / 0.5 inch.
I made some holes for the tripod using a heated nail. This is a 30mm base (~ 1 1/4 ") and the holes are 6mm (1/4") apart.
The tripod legs are glued in place.
The heliograph operator is made from the Eureka artillery crewman holding a shell. With the shell cut out it leaves his hands in quite a good position - looking like they are operating the Morse key behind the mirror.
The crewman with the coincidence-type range finder is adapted to a signaller holding binoculars. Most heliograph pictures show the spotter using a telescope - in this case I use some poetic license for convenience. It would be possible to scratch build a nice telescope on a tripod and cut away the second binocular lens.


The standing signaller has his base trimmed so the front foot will fit between the tripod legs.
Then, the signallers are ready to go!
For the first team I mounted the upright mirror frame strait on the apex of the tripod which was fiddly. This time I mounted a second piece of tube over the end as a base for the upright mirror. The made it easier, to mount the mirror frame but had the effect of raising the height of the heliograph a little. 
The mirror 'frame' is then glued in place.
The crew are mounted in place.
Heliograph completed. I painted the figures (in this case just the main colours blocked in) before I added the foil 'mirror'
on the front of the PVC tube frame.

Note that this was the first one I made - the above 'how to' pictures are of the second attempt where I used the second piece of PVC tube on top of the apex - you can see this earlier attempt sits a bit lower - I think this original team looks better, but it's quite fiddly getting the mirror frame to stick on the apex of the tripod.
I'm sure there are improvements that can be made to this approach - but this provides a quick and easy heliograph post.

As these teams will be supporting units of the 42nd Division (East Lancashire), I'm designating these as signallers from the 427th Field Company - identified thanks to the excellent resource on the Field Companies of the Royal Engineers on The Long, Long Trail.
A group of men of 527 (2nd Durham) Field Company, a Territorial unit that served under command of 5th Division.