Showing posts with label USMC. Show all posts
Showing posts with label USMC. Show all posts

Sunday 19 February 2017

Terrain boards for Afghanistan

A chance find of ten sample posts of a promising looking paint color at the local hardware store has prompted a weekend of terrain board building for my Afghanistan project. The idea is to build some fairly generic rocky desert boards that I can also for gaming WW1 in the Middle East.

Having tried my hand at terrain mats in the past - and finding attempts to built contours up under mats largely unsatisfactory -  I am going to try using flat terrain boards and add-on terrain for the various features. I'm using 6mm MDF for the base boards.

The paint I found was an acrylic 'suede finish' in a mid grey. It dries with almost a chalky surface. As mentioned, they were a series of unwanted color post being sold off for $1 a can - bargain. I'd never seen this finish before and I could see the potential for this use.
Few people would welcome that color sample as being of interest - rich pickings for a wargamer!
I started with a based coat on lightly sanded MDF and scattered some grit over the top while wet. I just used the sandy colored gravel I have use for landscaping, which you can see on my miniature bases as well - a lifetime supply of basing materials!
Once it dried, I knocked off the larger pieces of gravel with a scraper, leaving the more sandy textured finish. To this I added a second coat of suede paint - and a coat on the underside to overcome warping.

Leaving that to dry well - I then sponged on some yellow ochre craft paint and then dry-brushed with a 'sand' colored acrylic.

I finished the boards with a spray of a clear varnish I had at hand - the result is fairly good for an  unplanned project (which, let's face it, most of mine are!).

I couldn't resist taking a a few pictures of the growing collection of terrain and some of the completed Eureka USMC and Afghani 28mm miniatures. The compound design and technique is thanks to Matakishi. My terrain has a long way to go, but the boards are a huge step up from what I was using!








Tuesday 22 November 2016

USMC in Afghanistan

I am fortunate enough to have a 30 minute ride each way to work on the bus. This, coupled with the contents of the university's libraries at my disposal, makes for some good time to catch up on reading. Having read solidly on the Falklands for a couple of months, I was hankering for something new.

A recent visit to the Australian War Memorial in Canberra highlighted how little I knew about the more recent conflicts our country has been involved in - particularly the Gulf Wars and the counter insurgency efforts in Afghanistan. A new wargaming era to dabble in ... why not!

This led me, of course, to consider Eureka Miniatures release of 'Modern' US Marines and Afghan insurgents Sculpted by Kosta Heristanidis. Beautiful figures.

As per the advice on the Eureka Miniatures website for the Marines, I have used the following paint scheme for the Marines:

  • uniform is 60% Vallejo 321 Highlight British Tank crew (from the Panzer Ace range) and 40% Vallejo 951 White (Model Colour range)
  • The flak jacket is 50% Vallejo 923 Japanese Uniform WWII and 50% Vallejo 879 Green Brown
  • The light digitised camouflage used Vallejo 983 Flat Earth (Eureka article suggests 826 German Camouflage Medium Brown) stippled over the base colour.
  • Boots were a 50:50 mix of Vallejo 984 Flat Brown and Vallejo 317 British Tank Crew.
Here are some pics of the first batch with a little scenery: