Wednesday 24 August 2016

The Three Headed Dog: HMVS Cerberus scratchbuild in 1:600

 The wreck of the breastwork monitor HMVS Cerberus sits in Half Moon Bay, Melbourne, Australia, where she was sunk in 1926 as a breakwater. She sits there, decaying away, despite valiant efforts to preserve what is one of the last of the monitors. See: http://www.cerberus.com.au
Since reading an interesting account of the birth of the Victorian Navy (eg. of the Colony of Victoria ... not the era) by Wilson P Evans - "Deeds Not Words: The Victorian Navy", The Hawthorn Press, Melbourne 1971 - I've longed to have a scale model I could do some "what if" naval gaming with.


Why buy, when you can build, I say! Here is the first steps towards bring the Three Headed Dog back to life again - if only on the gaming table. The scale is 1:600.




With the basic turret roof in place, the pile of PVC begins to reflect the Three Headed Dog!
Interior of the aft turret awaiting the gun ports to be cut and the main guns fitted.
Gun ports cut and barrels fitted.
With the upper deck sitting in place, it's not looking right - too thick? Maybe it'll improve when the superstructure, mast and ship's boats are in place.
Well, the Flying Deck did improve visually when I cut it to the correct width (original was 20 feet wide). Then I've added the mast, fighting top, funnel and rear access to gangway.



7 comments:

  1. Awesome start! Definitely following this build. If you care to see what I did in 1/32nd for HMQS Gayundah please visit my blog.
    Cheers
    SaltyDog

    ReplyDelete
  2. Thanks Col, the HMQS Gayndah is sensational - beautiful work. I'm looking forward to trawling your blog further in the wee hours! Cheers Alan

    ReplyDelete
  3. Alan, I'm once again impressed by your skills as a naval architect! What a cool ship, and a very nice article! Best wishes, mate!

    ReplyDelete
  4. Thanks Rob and Phobos! The project has stalled a while as I'm waiting to pick up some fine wire for davits and am contemplating how to model the ships boats. Thanks for your encouragement!

    ReplyDelete
  5. Excellent work on your Cerberus model!
    A good scale drawing is crucial to these projects.
    I look forward to seeing updates on this...

    ReplyDelete
  6. Thanks Captain! Like so many projects this has hit a slow phase - partly because of struggling with a lack of detail. Also, been distracted by 28mm moderns! Will get it back not eh table and post some updates.

    ReplyDelete